Compare Products

2019 Toro Pistol Grip 36 in. Zero Turn Mower
2019 Toro Pistol Grip 36 in. Zero Turn Mower

Specs

General Information

Manufacturer
Toro
Toro
Model Year
2019
2019
Model
Pistol Grip 36 in. Zero Turn Mower
Pistol Grip 36 in. Zero Turn Mower
Model Code
39634
39634
Color
Red
Red

Drivetrain

Transmission/Drive
5-speed
5-speed
Travel Speed

Forward - 6.2 mph (10 km/h)

Reverse - Assist

Forward - 6.2 mph (10 km/h)

Reverse - Assist

Wheels/Tires

Drive Tires - 13 x 6.5-6 in. (33 x 15 x 16.5 cm)

Caster Tires - 9 x 3.50 - 4 in. (23 x 9 -10 cm) Flat-free

Drive Tires - 13 x 6.5-6 in. (33 x 15 x 16.5 cm)

Caster Tires - 9 x 3.50 - 4 in. (23 x 9 -10 cm) Flat-free

Brakes
Band - 6 in. (15 cm)
Band - 6 in. (15 cm)

Engine

Engine Make
Kawasaki®
Kawasaki®
Engine Model
FS481V
FS481V
Horsepower

14.5 hp

The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

14.5 hp

The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

Displacement
603 cc
603 cc
Starter
Recoil
Recoil
Air Cleaner
2-stage
2-stage

Measurements

Length
80 in. (203 cm)
80 in. (203 cm)
Height
41 in. (104 cm)
41 in. (104 cm)
Width
37.1 in. (94 cm) with chute up
37.1 in. (94 cm) with chute up
Weight
462 lb. (209 kg)
462 lb. (209 kg)
Mowing Width
36 in. (91 cm)
36 in. (91 cm)
Mowing Height Range
1 - 4.25 in. (2.5 - 11 cm)
1 - 4.25 in. (2.5 - 11 cm)
Mowing Height Adjustments
1/8 in. (3 mm) increments
1/8 in. (3 mm) increments
Fuel Tank Capacity
5 gal. (19 l)
5 gal. (19 l)

Operational

Steering
Controls - Pistol Grips
Controls - Pistol Grips

Other

Deck Construction
36 in. (91 cm) TURBO FORCE
36 in. (91 cm) TURBO FORCE
Spindles
Housings - Cast iron with 9 - 3/8 in. (24 cm) base
Housings - Cast iron with 9 - 3/8 in. (24 cm) base
Blades
2
2
Blade Tip Speed
18,000 ft. / min. (5,486 m/min.)
18,000 ft. / min. (5,486 m/min.)
Discharge
High-performance 5/16 in. (8 mm) Rubber Chute
High-performance 5/16 in. (8 mm) Rubber Chute
Mulching
Standard
Standard

Features

Features

  • PISTON GRIP CONTROL SYSTEM: The individual handles make it easier to control tracking long straight lines. The release to go interlock, reduces operator fatigue.
  • EXCLUSIVE TURBO FORCE DECK: High-capacity 7/10 ga. TURBO FORCE deck delivers unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Easily handles the most demanding conditions and resists damage from impacts and abrasion. The 5 in. deep deck features 8 in. aluminum spindles, a Bull Nose Bumper and a rubber discharge chute.
  • RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • PATENTED ADJUSTABLE BAFFLE: Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.
  • SMARTER DESIGN IN A BULL-NOSE BUMPER: 7 ga. bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4 in. (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
  • RUGGED SPINDLE ASSEMBLY: Rigorously tested to ensure that it can survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9 3/8 in. (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell. Built with maintenance-free sealed ball bearings.
  • EXTENDED LIFE DRIVE SYSTEM: Extended life drive system with Husqvarna Peerless 700 series transmission, featuring a 9 spline drive coupler.
  • A FLAT CRISP CUT WITH PRECISION BLADES: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Features

  • PISTON GRIP CONTROL SYSTEM: The individual handles make it easier to control tracking long straight lines. The release to go interlock, reduces operator fatigue.
  • EXCLUSIVE TURBO FORCE DECK: High-capacity 7/10 ga. TURBO FORCE deck delivers unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Easily handles the most demanding conditions and resists damage from impacts and abrasion. The 5 in. deep deck features 8 in. aluminum spindles, a Bull Nose Bumper and a rubber discharge chute.
  • RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • PATENTED ADJUSTABLE BAFFLE: Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.
  • SMARTER DESIGN IN A BULL-NOSE BUMPER: 7 ga. bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4 in. (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
  • RUGGED SPINDLE ASSEMBLY: Rigorously tested to ensure that it can survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9 3/8 in. (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell. Built with maintenance-free sealed ball bearings.
  • EXTENDED LIFE DRIVE SYSTEM: Extended life drive system with Husqvarna Peerless 700 series transmission, featuring a 9 spline drive coupler.
  • A FLAT CRISP CUT WITH PRECISION BLADES: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.