Compare Products

2019 Toro Fixed Deck Hydro Pistol Grip 36 in. Zero Turn Mower
2019 Toro Fixed Deck Hydro Pistol Grip 36 in. Zero Turn Mower

Specs

General Information

Manufacturer
Toro
Toro
Model Year
2019
2019
Model
Fixed Deck Hydro Pistol Grip 36 in. Zero Turn Mower
Fixed Deck Hydro Pistol Grip 36 in. Zero Turn Mower
Model Code
39934
39934
Color
Red
Red

Drivetrain

Transmission/Drive
Hydrostatic Twin Hydro-Gear® Pumps
Hydrostatic Twin Hydro-Gear® Pumps
Travel Speed

Forward - 6.2 mph (10 km/h)

Reverse - 2.2 mph (4 km/h)

Forward - 6.2 mph (10 km/h)

Reverse - 2.2 mph (4 km/h)

Wheels/Tires

Drive Tires - 16 x 6.5 - 8 in. (40.6 x 16.5 - 20.3 cm)

Caster Tires - 9 x 3.5 - 4 in. (23 x 9 - 10 cm) Flat-free

Drive Tires - 16 x 6.5 - 8 in. (40.6 x 16.5 - 20.3 cm)

Caster Tires - 9 x 3.5 - 4 in. (23 x 9 - 10 cm) Flat-free

Engine

Engine Make
Kawasaki®
Kawasaki®
Engine Model
FS481V
FS481V
Horsepower

14.5 hp

The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

14.5 hp

The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

Displacement
603 cc
603 cc
Starter
Recoil
Recoil
Air Cleaner
2-stage
2-stage

Hydraulics

Hydraulic System
Fluid - Premium Synthetic
Fluid - Premium Synthetic

Measurements

Length
74 in. (188 cm)
74 in. (188 cm)
Height
41 in. (104 cm)
41 in. (104 cm)
Width
37.1 in. (94 cm)
37.1 in. (94 cm)
Weight
460 lb. (208 kg)
460 lb. (208 kg)
Mowing Width
36 in. (91.4 cm)
36 in. (91.4 cm)
Mowing Height Range
1 - 4 - 1/4 in. (2.5 - 10.8 cm)
1 - 4 - 1/4 in. (2.5 - 10.8 cm)
Mowing Height Adjustments
1/8 in. (3 mm) increments
1/8 in. (3 mm) increments
Fuel Tank Capacity
5 gal. (19 l)
5 gal. (19 l)

Operational

Steering
Pistol Grips
Pistol Grips

Other

Spindles
Housings - Cast iron with 9 - 3/8 in. (23.8 cm) base
Housings - Cast iron with 9 - 3/8 in. (23.8 cm) base
Blade Tip Speed
18,500 ft. /min. (5,639 m/min.)
18,500 ft. /min. (5,639 m/min.)
Discharge
High performance 5/16 in. (8 mm) Rubber Chute; Side
High performance 5/16 in. (8 mm) Rubber Chute; Side
Mulching
Standard
Standard

Features

Features

  • EXCLUSIVE TURBO FORCE DECK: High-capacity 7/10 guage TURBO FORCE deck delivers unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Easily handles the most demanding conditions and resists damage from impacts and abrasion.
  • PATENTED ADJUSTABLE BAFFLE: Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.
  • RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • SMARTER DESIGN IN A BULL-NOSE BUMPER: 7 ga. bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4 in. (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
  • THE INDUSTRY TOUGHEST SPINDLE ASSEMBLY: Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9-3/8 in. (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell.
  • A FLAT CRISP CUT WITH PRECISION BLADES: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  • PREMIUM HYDRAULICS-MD: Independent, commercial-duty 0.6 cu. in. (10 cc) displacement pumps and wheel motors provide instant forward and reverse control without shifting.

Features

  • EXCLUSIVE TURBO FORCE DECK: High-capacity 7/10 guage TURBO FORCE deck delivers unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Easily handles the most demanding conditions and resists damage from impacts and abrasion.
  • PATENTED ADJUSTABLE BAFFLE: Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.
  • RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • SMARTER DESIGN IN A BULL-NOSE BUMPER: 7 ga. bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4 in. (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
  • THE INDUSTRY TOUGHEST SPINDLE ASSEMBLY: Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9-3/8 in. (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell.
  • A FLAT CRISP CUT WITH PRECISION BLADES: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  • PREMIUM HYDRAULICS-MD: Independent, commercial-duty 0.6 cu. in. (10 cc) displacement pumps and wheel motors provide instant forward and reverse control without shifting.