Compare Products

2019 Toro 5000 Series 48 in. Zero Turn Mower
2019 Toro 5000 Series 48 in. Zero Turn Mower

Specs

General Information

Manufacturer
Toro
Toro
Model Year
2019
2019
Model
5000 Series 48 in. Zero Turn Mower
5000 Series 48 in. Zero Turn Mower
Model Code
74904
74904
Color
Red
Red

Body

Frame
Carrier - 3 x 1.5 in. (7.6 x 3.8 cm) 10 ga.
Carrier - 3 x 1.5 in. (7.6 x 3.8 cm) 10 ga.
Seat
Deluxe suspension
Deluxe suspension
Rollover Protection (ROPS)
Folding; standard
Folding; standard

Drivetrain

Transmission/Drive
Hydraulic unitized pumps and wheel motors
Hydraulic unitized pumps and wheel motors
Travel Speed
Forward - 10 mph (16.1 km/h)
Forward - 10 mph (16.1 km/h)
Wheels/Tires

Drive Tires - 23 x 9.5 -12 in. (58 x 24-30.5 cm)

Caster Tires - 13 x 5 - 6 in. (33 x 12.7-15.2 cm) flat-free semi-pneumatic

Drive Tires - 23 x 9.5 -12 in. (58 x 24-30.5 cm)

Caster Tires - 13 x 5 - 6 in. (33 x 12.7-15.2 cm) flat-free semi-pneumatic

Engine

Engine Make
Kohler®
Kohler®
Engine Model
Command Pro EFI
Command Pro EFI
Fuel Type
Gas
Gas
Horsepower

23 hp

The gross horsepower of this engine was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

23 hp

The gross horsepower of this engine was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

Displacement
747 cc
747 cc
Air Cleaner
Heavy-Duty Canister
Heavy-Duty Canister

Hydraulics

Hydraulic System
Fluid - Premium synthetic
Fluid - Premium synthetic

Measurements

Width
Deck - 48 in. (122 cm)
Deck - 48 in. (122 cm)
Mowing Height Range
1 - 5.5 in. (2.5 - 14 cm)
1 - 5.5 in. (2.5 - 14 cm)
Mowing Height Adjustments
0.25 in. (0.6 cm) increments
0.25 in. (0.6 cm) increments
Fuel Tank Capacity
Single-Point Fill - 12 gal. (45 l)
Single-Point Fill - 12 gal. (45 l)

Operational

Steering
Diameter Levers; Adjustable - 1.625 in. (4.1 cm)
Diameter Levers; Adjustable - 1.625 in. (4.1 cm)

Other

Deck Construction
TURBO FORCE® with bull nose-bumper - 7 ga.
TURBO FORCE® with bull nose-bumper - 7 ga.
Spindles

Housings - Cast iron

Bearings - Greasable

Housings - Cast iron

Bearings - Greasable

Blades
Thick Heat-Treated Steel - 0.25 in. (6 mm)
Thick Heat-Treated Steel - 0.25 in. (6 mm)
Blade Tip Speed
18,500+ ft. / min. (5,638.8 m/min.)
18,500+ ft. / min. (5,638.8 m/min.)
Discharge
Rubber chute
Rubber chute

Features

Features

  • EXCLUSIVE TURBO FORCE DECK: High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
  • 7-GAUGE HIGH-STRENGTH STEEL: The TURBO FORCE deck is constructed of 7 ga., high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10 ga. commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
  • INDUSTRY'S TOUGHEST SPINDLE ASSEMBLIES: Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. A stout cast iron housing with a massive base and six mounting bolts absorbs impact loads and distributes them across a broader area of the deck shell. Plus, the solid, one-inch diameter shaft is alloy steel, not the common lower-grade steel used in many competitive models.
  • A FLAT CRISP CUT WITH PRECISION BLADES: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  • DELUXE SUSPENSION SEAT: Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue. Part # 121-7595 – Optional Replacement 2000/3000 Series
  • RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • SMARTER DESIGN IN A BULL-NOSE BUMPER: 7 ga. bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 0.25 in. (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
  • PATENTED ADJUSTABLE BAFFLE: Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.
  • SMOOTH, POWERFUL RESPONSE: The new unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You'll get a smoother, faster response while enjoying an even more reliable machine.
  • OPERATOR INFORMATION CENTER: The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.
  • FOLDING ROLLOVER PROTECTION SYSTEM ROPS: A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
  • CONVENIENCE AND COMFORT: Operator controls are conveniently located. Large 1-5/8 in. (4.1 cm) diameter steering levers increase comfort and reduce fatigue. Handy storage compartment provides location for cell phone, tools, and more. Built-in cup holder provided.

Features

  • EXCLUSIVE TURBO FORCE DECK: High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
  • 7-GAUGE HIGH-STRENGTH STEEL: The TURBO FORCE deck is constructed of 7 ga., high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10 ga. commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
  • INDUSTRY'S TOUGHEST SPINDLE ASSEMBLIES: Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. A stout cast iron housing with a massive base and six mounting bolts absorbs impact loads and distributes them across a broader area of the deck shell. Plus, the solid, one-inch diameter shaft is alloy steel, not the common lower-grade steel used in many competitive models.
  • A FLAT CRISP CUT WITH PRECISION BLADES: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  • DELUXE SUSPENSION SEAT: Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue. Part # 121-7595 – Optional Replacement 2000/3000 Series
  • RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • SMARTER DESIGN IN A BULL-NOSE BUMPER: 7 ga. bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 0.25 in. (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
  • PATENTED ADJUSTABLE BAFFLE: Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.
  • SMOOTH, POWERFUL RESPONSE: The new unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You'll get a smoother, faster response while enjoying an even more reliable machine.
  • OPERATOR INFORMATION CENTER: The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.
  • FOLDING ROLLOVER PROTECTION SYSTEM ROPS: A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
  • CONVENIENCE AND COMFORT: Operator controls are conveniently located. Large 1-5/8 in. (4.1 cm) diameter steering levers increase comfort and reduce fatigue. Handy storage compartment provides location for cell phone, tools, and more. Built-in cup holder provided.