Compare Products

Honda Power Equipment WT20
Honda Power Equipment WT20

Specs

General Information

Manufacturer
Honda Power Equipment
Honda Power Equipment
Model
WT20
WT20
Model Code
658180
658180
Color
Silver
Silver

Dimensions

Height
18.3 in.
18.3 in.
Width
18.1 in.
18.1 in.
Weight
Dry - 104 lb.
Dry - 104 lb.
Length
24.4 in.
24.4 in.

Engine

Fuel Tank Capacity
0.82 gal.
0.82 gal.
Bore x Stroke
2.7 x 1.8 in.
2.7 x 1.8 in.
Engine
Honda GX 160 OHV
Honda GX 160 OHV
Compression Ratio
9.0:1
9.0:1

Operational

Total Head Lift
85 ft.
85 ft.
Self Priming Time
60 sec. @ 16.4 ft.
60 sec. @ 16.4 ft.
Suction Head Lift
26 ft.
26 ft.
Suction Port Diameter
2 in.
2 in.
Maximum Pressure
37 psi
37 psi
Discharge Capacity
185 gpm
185 gpm
Volute
Rigid Mounted Cast Iron with Stainless Wear Plate
Rigid Mounted Cast Iron with Stainless Wear Plate
Solids Handling
13/16 in.
13/16 in.
Impeller
Conical Cast Iron
Conical Cast Iron
Pump
Trash Centrifugal Self-priming
Trash Centrifugal Self-priming
Seals

Pump Case - Silicon Carbide

Impeller - Silicon Carbide

Pump Case - Silicon Carbide

Impeller - Silicon Carbide

Discharge Port
2 in.
2 in.
Drive System
Direct
Direct

Other

Warranty

Residential - 3 years

Commercial - 3 Years

Residential - 3 years

Commercial - 3 Years

Features

Features

  • HEAVY-DUTY 2 IN. CONSTRUCTION TRASH PUMP: Specially designed for job sites and applications where high volume trash water capacity is needed.
  • EASY STARTING HONDA OHV COMMERCIAL ENGINE: The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
  • 185 GAL. / MIN CAPACITY
  • SOLID HANDLING CAPABILITY UP TO 13/16 IN.
  • HEAVY DUTY FULL FRAME PROTECTION: Protects the pump, while offering a convenient tie down location for transport.
  • EASY QUICK CLEAN OUT PORT: The WT20 is designed for quick and easy service. An easy access service port makes clean-out quick.
  • REPLACEABLE STAINLESS STEEL WEAR PLATE: The volute is equipped with a replaceable stainless steel wear plate, which increases durability and reduces maintenance costs
  • STANDARD SERVICE TOOL: A convenient multi-tool is provided for easy removal and installation of the pump case, for tightening and removal of the priming plug and drain plug, and for tightening and removal of the hose coupling.
  • DURABLE SILICON CARBIDE MECHANICAL SEAL: The WB20 features abrasion-resistant silicone-carbide seals for extended wear.
  • CAST IRON VOLUTE AND IMPELLER: The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
  • ISOLATION MOUNTED ENGINE AND PUMP: High performance mounts minimize vibration, keeping the pump from “walking” away or “burying” itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
  • UNIQUE CONICAL SHAPED IMPELLER: The unique shape improves priming and higher discharge capacity. Wide vanes are designed to resist wear and maximize durability.
  • PROTECTED BY HONDA OIL ALERT®: Protects the pump by shutting the engine off when low oil is detected.
  • LARGE HEAVY DUTY METAL STRAINER: The strainer allows up to 13/16 in. solids to pass through, as well as a large volume of water, helping to prevent clogging. Made of steel to withstand tough conditions.

Features

  • HEAVY-DUTY 2 IN. CONSTRUCTION TRASH PUMP: Specially designed for job sites and applications where high volume trash water capacity is needed.
  • EASY STARTING HONDA OHV COMMERCIAL ENGINE: The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
  • 185 GAL. / MIN CAPACITY
  • SOLID HANDLING CAPABILITY UP TO 13/16 IN.
  • HEAVY DUTY FULL FRAME PROTECTION: Protects the pump, while offering a convenient tie down location for transport.
  • EASY QUICK CLEAN OUT PORT: The WT20 is designed for quick and easy service. An easy access service port makes clean-out quick.
  • REPLACEABLE STAINLESS STEEL WEAR PLATE: The volute is equipped with a replaceable stainless steel wear plate, which increases durability and reduces maintenance costs
  • STANDARD SERVICE TOOL: A convenient multi-tool is provided for easy removal and installation of the pump case, for tightening and removal of the priming plug and drain plug, and for tightening and removal of the hose coupling.
  • DURABLE SILICON CARBIDE MECHANICAL SEAL: The WB20 features abrasion-resistant silicone-carbide seals for extended wear.
  • CAST IRON VOLUTE AND IMPELLER: The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
  • ISOLATION MOUNTED ENGINE AND PUMP: High performance mounts minimize vibration, keeping the pump from “walking” away or “burying” itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
  • UNIQUE CONICAL SHAPED IMPELLER: The unique shape improves priming and higher discharge capacity. Wide vanes are designed to resist wear and maximize durability.
  • PROTECTED BY HONDA OIL ALERT®: Protects the pump by shutting the engine off when low oil is detected.
  • LARGE HEAVY DUTY METAL STRAINER: The strainer allows up to 13/16 in. solids to pass through, as well as a large volume of water, helping to prevent clogging. Made of steel to withstand tough conditions.