Compare Products

2019 Toro T-Bar 32 in. Zero Turn Mower
2019 Toro T-Bar 32 in. Zero Turn Mower

Specs

General Information

Manufacturer
Toro
Toro
Model Year
2019
2019
Model
T-Bar 32 in. Zero Turn Mower
T-Bar 32 in. Zero Turn Mower
Model Code
30672
30672
Color
Red
Red

Drivetrain

Transmission/Drive
5- Speed
5- Speed
Travel Speed

Forward - 6.2 mph (10 km/h)

Reverse - Assist

Forward - 6.2 mph (10 km/h)

Reverse - Assist

Wheels/Tires

Drive Tires - 13 x 5 - 6 in. (33 x 13 - 15 cm)

Caster Tires - 9 x 3.5 - 4 in. (23 x 9 - 10 cm) Flat-free

Drive Tires - 13 x 5 - 6 in. (33 x 13 - 15 cm)

Caster Tires - 9 x 3.5 - 4 in. (23 x 9 - 10 cm) Flat-free

Brakes
Band - 6 in. (15.2 cm)
Band - 6 in. (15.2 cm)

Engine

Engine Make
Kawasaki®
Kawasaki®
Engine Model
FS481V
FS481V
Horsepower

14.5 hp

The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

14.5 hp

The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

Displacement
603 cc
603 cc
Starter
Recoil
Recoil
Air Cleaner
2-stage
2-stage

Measurements

Length
72 in. (183 cm)
72 in. (183 cm)
Height
41 in. (104 cm)
41 in. (104 cm)
Width
32.8 in. (83 cm) with chute up
32.8 in. (83 cm) with chute up
Weight
400 lb. (181 kg)
400 lb. (181 kg)
Mowing Width
32 in. (81 cm)
32 in. (81 cm)
Mowing Height Range
1 - 4 1/4 in. (2.5 - 10.8 cm)
1 - 4 1/4 in. (2.5 - 10.8 cm)
Mowing Height Adjustments
1/8 in. (3 mm) increments
1/8 in. (3 mm) increments
Fuel Tank Capacity
5 gal. (19 l)
5 gal. (19 l)

Operational

Steering
Controls - T-Bar
Controls - T-Bar

Other

Blades
2
2
Blade Tip Speed
18,500 ft. /min. (5,486 m/min.)
18,500 ft. /min. (5,486 m/min.)
Discharge
Rubber, Side
Rubber, Side
Mulching
Standard
Standard

Features

Features

  • T-BAR STEERING CONTROLS: Exclusive Toro T-Bar steering system is easy to use and ergonomically designed to reduce operator fatigue. Great for tracking in large open spaces and also maneuvering around obstacles. All around an intuitive control system.
  • RUGGED DECK DESIGN: High-capacity 7/10 guage deck delivers unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Easily handles the most demanding conditions and resists damage from impacts and abrasion. The 5" deep deck features 8" aluminum spindles and a rubber discharge chute.
  • RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • EXTENDED LIFE DRIVE SYSTEM: Extended life drive system with Husqvarna Peerless 700 series transmission, featuring a 9 spline drive coupler.
  • RUGGED SPINDLE ASSEMBLY: Rigorously tested to ensure that it can survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9 3/8 in. (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell. Built with maintenance-free sealed ball bearings.
  • A FLAT CRISP CUT WITH PRECISION BLADES: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Features

  • T-BAR STEERING CONTROLS: Exclusive Toro T-Bar steering system is easy to use and ergonomically designed to reduce operator fatigue. Great for tracking in large open spaces and also maneuvering around obstacles. All around an intuitive control system.
  • RUGGED DECK DESIGN: High-capacity 7/10 guage deck delivers unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Easily handles the most demanding conditions and resists damage from impacts and abrasion. The 5" deep deck features 8" aluminum spindles and a rubber discharge chute.
  • RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • EXTENDED LIFE DRIVE SYSTEM: Extended life drive system with Husqvarna Peerless 700 series transmission, featuring a 9 spline drive coupler.
  • RUGGED SPINDLE ASSEMBLY: Rigorously tested to ensure that it can survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9 3/8 in. (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell. Built with maintenance-free sealed ball bearings.
  • A FLAT CRISP CUT WITH PRECISION BLADES: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.