Compare Products

2019 Toro 3000 Series MyRide 60 in. Zero Turn Mower
2019 Toro 3000 Series MyRide 60 in. Zero Turn Mower

Specs

General Information

Manufacturer
Toro
Toro
Model Year
2019
2019
Model
3000 Series MyRide 60 in. Zero Turn Mower
3000 Series MyRide 60 in. Zero Turn Mower
Model Code
75936
75936
Color
Red
Red

Body

Frame
3 x 1.5 x 10 in. ga.
3 x 1.5 x 10 in. ga.
Seat
Deluxe seat with padded armrests
Deluxe seat with padded armrests
Rollover Protection (ROPS)
Folding; standard
Folding; standard

Drivetrain

Travel Speed
Forward - 10 mph
Forward - 10 mph
Wheels/Tires

Drive Tires - 24 x 12 - 12 in.

Caster Tires - 13 x 6.5 - 6 in. pneumatic

Anti-Scalp - 4 Standard, 1 Optional

Drive Tires - 24 x 12 - 12 in.

Caster Tires - 13 x 6.5 - 6 in. pneumatic

Anti-Scalp - 4 Standard, 1 Optional

Engine

Engine Make
Kawasaki®
Kawasaki®
Engine Model
FX
FX
Horsepower

25.5 hp

The gross horsepower of these engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.

25.5 hp

The gross horsepower of these engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.

Displacement
726 cc
726 cc
Air Cleaner
Heavy-Duty Canister
Heavy-Duty Canister

Hydraulics

Hydraulic System
Fluid - Premium synthetic
Fluid - Premium synthetic

Measurements

Width
60 in. (152 cm)
60 in. (152 cm)
Mowing Height Range
1 - 5.5 in.
1 - 5.5 in.
Mowing Height Adjustments
.25 in. increments
.25 in. increments
Fuel Tank Capacity
8 gal. - single-point fill
8 gal. - single-point fill

Operational

Steering
Diameter grips; adjustable, dampened - 1 - 5/8 in. (4.1 cm)
Diameter grips; adjustable, dampened - 1 - 5/8 in. (4.1 cm)

Other

Deck Construction
TURBO FORCE® with bull-nose bumper - 7 ga.
TURBO FORCE® with bull-nose bumper - 7 ga.
Spindles
Cast Iron
Cast Iron
Blades
Thick Heat-Treated Steel - .25 in. (.6 cm)
Thick Heat-Treated Steel - .25 in. (.6 cm)
Blade Tip Speed
18,300+ ft. / min. (5,577.8 m/min.)
18,300+ ft. / min. (5,577.8 m/min.)
Discharge
Rubber chute
Rubber chute

Features

Features

  • MYRIDE MAXIMUM COMFORT: The suspended operator platform allows for 3.6" of travel and reduces impacts, bumps and vibrations that reach the operator, resulting in a superior ride.
  • PERSONALIZED RIDE SETTINGS: The operator can easily and quickly adjust rear shock ride settings to account for their personal ride preferences, without the use of tools!
  • EXCLUSIVE TURBO FORCE DECK: High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
  • 7-GAUGE, HIGH-STRENGTH STEEL: The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
  • INDUSTRY'S TOUGHEST SPINDLE ASSEMBLIES: Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. A stout cast iron housing with a massive base and six mounting bolts absorbs impact loads and distributes them across a broader area of the deck shell. Plus, the solid, one-inch diameter shaft is alloy steel, not the common lower-grade steel used in many competitive models.
  • A FLAT CRISP CUT WITH PRECISION BLADES: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  • CONVENIENCE AND COMFORT: Operator controls are conveniently located. Large 1-5/8" (4.1 cm) diameter steering levers increase comfort and reduce fatigue. Handy storage compartment provides location for cell phone, tools, and more. Built-in cup holder provided.
  • RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • RUGGED FRAME: A commercial-grade carrier frame, constructed of 3" x 1.5" tubular steel, supports the cutting deck and stands up to the rigors of professional use.
  • FOLDING ROLLOVER PROTECTION SYSTEM ROPS:A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

Features

  • MYRIDE MAXIMUM COMFORT: The suspended operator platform allows for 3.6" of travel and reduces impacts, bumps and vibrations that reach the operator, resulting in a superior ride.
  • PERSONALIZED RIDE SETTINGS: The operator can easily and quickly adjust rear shock ride settings to account for their personal ride preferences, without the use of tools!
  • EXCLUSIVE TURBO FORCE DECK: High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
  • 7-GAUGE, HIGH-STRENGTH STEEL: The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
  • INDUSTRY'S TOUGHEST SPINDLE ASSEMBLIES: Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. A stout cast iron housing with a massive base and six mounting bolts absorbs impact loads and distributes them across a broader area of the deck shell. Plus, the solid, one-inch diameter shaft is alloy steel, not the common lower-grade steel used in many competitive models.
  • A FLAT CRISP CUT WITH PRECISION BLADES: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  • CONVENIENCE AND COMFORT: Operator controls are conveniently located. Large 1-5/8" (4.1 cm) diameter steering levers increase comfort and reduce fatigue. Handy storage compartment provides location for cell phone, tools, and more. Built-in cup holder provided.
  • RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • RUGGED FRAME: A commercial-grade carrier frame, constructed of 3" x 1.5" tubular steel, supports the cutting deck and stands up to the rigors of professional use.
  • FOLDING ROLLOVER PROTECTION SYSTEM ROPS:A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.